Skip to content
Email: parts@hitreeconveyor.com WhatsApp: +86 156 1045 3783
Guide

How to Choose a Vacuum Suction Cup for Your Robot

Flat or bellows, NBR, silicone or PU, and how many cups you need. A practical guide to sizing vacuum suction cups for robot vacuum grippers.

A vacuum suction cup is the simplest way for a robot to pick flat and smooth parts. Choosing the right cup comes down to four questions: what shape, what material, what size, and how many.

1. Cup shape: flat or bellows

Flat suction cups have a low profile and stay stiff under side loads. Use them for flat, rigid parts such as sheet metal, glass and boards, and when the part must be placed accurately.

Bellows suction cups have one or more folds. They follow curved and uneven surfaces, absorb small height differences between parts, and lift the part slightly when vacuum is applied. Use them for car body parts, cartons, bags and parts that are not perfectly flat.

2. Cup material

Material Best for Notes
NBR (nitrile) Oily sheet metal, general use Good oil resistance, low cost
Silicone Food, high temperature, smooth parts Wide temperature range; check before using on parts that will be painted
PU (polyurethane) Abrasive or rough surfaces High wear resistance, long life

If the part surface will be painted or bonded after handling, ask for a cup compound that does not leave residue.

3. Cup size: the holding force formula

The theoretical holding force of one cup is:

F = ΔP × A
  • ΔP is the vacuum level (for example 60 kPa = 0.06 N/mm²)
  • A is the effective cup area in mm²

A Ø 40 mm cup has an area of about 1,257 mm². At −60 kPa it holds about 1,257 × 0.06 ≈ 75 N in theory.

4. How many cups: apply the safety factor

The total holding force of all cups must be greater than the load times a safety factor:

  • Horizontal lift (cups on top of the part, moving up): safety factor of at least 2.
  • Vertical lift (cups on the side of the part, load in shear): safety factor of at least 4, because only friction holds the part.

Include robot acceleration in the load: load = m × (g + a).

Example

A 5 kg steel sheet is lifted horizontally. The robot accelerates at 5 m/s².

  • Load = 5 × (9.81 + 5) ≈ 74 N
  • Required holding force = 74 × 2 ≈ 148 N
  • Ø 40 mm cups at −60 kPa give about 75 N each, so you need at least 2 cups.

In practice, use 4 cups spread across the sheet. This keeps the sheet flat, balances the load and gives margin if one cup leaks.

Vacuum source

Compressed-air vacuum ejectors are light and mount directly on the robot tool, which makes them the usual choice for robot vacuum grippers. For porous parts such as cardboard or foam, leakage is high, so choose a larger ejector or a vacuum pump.

Summary

  1. Flat cups for flat, rigid parts; bellows cups for curved or uneven parts.
  2. Pick the material for the surface: NBR, silicone or PU.
  3. Holding force = vacuum × area.
  4. Safety factor at least 2 horizontal, at least 4 vertical, including acceleration.

Send us your part size, weight and material, and we will design the cup layout for you.

Products

Explore HITREE products

More selection guides →

SERIES HP

Pneumatic Grippers & Clamps

2-finger pneumatic parallel grippers in compact, long-stroke and magnetic switch versions, plus pneumatic clamps for holding parts and fixtures.

  • 2-finger parallel gripper
  • Long-stroke gripper
  • Compact gripper
  • Magnetic switch version
  • Pneumatic clamps
Stroke / jaw
3 – 80 mm
Grip force
45 – 1,200 N
Sensing
Magnetic switch slot
View pneumatic grippers & clamps →
SERIES HV

Vacuum Suction Cups & Generators

Vacuum suction cups for robots, vacuum generators and complete multi-cup vacuum grippers for sheet metal, cartons, glass and panels.

  • Flat suction cups
  • Bellows suction cups
  • Multi-cup vacuum grippers
  • Vacuum generators
  • Spring buffers & holders
Cup diameter
Ø 6 – 100 mm
Cup material
NBR / Silicone / PU
Payload
Up to 50 kg
View vacuum suction cups & generators →
SERIES HQ

Robot Tool Changers

Robotic quick changers that swap grippers and vacuum tools in seconds, with fail-safe locking and air and signal pass-through.

  • Robot side (master plate)
  • Tool side (tool plate)
  • Signal modules
  • Tool stands
Payload
3 – 300 kg
Repeatability
±0.01 mm
Air passages
6 – 8
View robot tool changers →
SERIES HC

Custom Robot Grippers

Complete robot end effectors designed around your workpiece: custom fingers, combined grip-and-suction tools and multi-station grippers.

  • Custom fingers and jaws
  • Double and multi grippers
  • Combined grip and vacuum tools
  • Turnkey end effectors
Design
3D model for approval
Input needed
Part data + robot model
Lead time
Quoted per project
View custom robot grippers →
Chat on WhatsApp